How to Improve Your Home Efficiency and Save Energy?

If you’re an environmentalist or are just trying to cut down on your HVAC San Jose costs, increasing your home’s energy efficiency could bring you a variety of advantages. Efficiency in energy usage helps to reduce carbon dioxide gases that enter the atmosphere to the minimum while also maximizing your savings.


One of the most popular methods to improve your home efficiency and save energy us to reduce your overall energy consumption. Work with a professional to help you assess energy efficiency opportunities.


Continue reading to learn about proven and tested tips for saving energy in your home.


How to Improve Your Home Efficiency and Save Energy?

Increasing efficiency in energy usage requires an entire home overhaul. But plenty of methods exist to reduce your carbon footprint without breaking the budget. This could include the installation of insulation.


Step 1: Learn How to Reduce Your Energy Consumption

The most effective way to increase your home’s efficiency is to cut down on energy usage initially. Here’s how.


Opt for Energy Efficient Appliances

Have you ever noticed the ENERGY STAR logo on a kitchen appliance? ENERGY STAR is a government-backed program to help consumers decrease their energy usage.


If the blue star is absent from your appliance, consider upgrading. Take a walk around your house and note the condition and energy ratings of the machines:


  • Water heater
  • Refrigerator
  • Freezer
  • Oven
  • Washer
  • Dryer
  • Air conditioner
  • Furnace
  • Dishwasher


Generally, if any of your appliances are older than ten years, it is time to consider upgrading them. Technological advancement has made the most straightforward machines more effective than in the past.


Although there’s an initial cost for purchasing a new refrigerator or cooktop, it will save money in the long term. An average homeowner can expect energy savings of at least $500 each year by switching to appliances that are energy efficient.


Change Your Lightbulbs

What energy can a little lightbulb consume? In the end, quite a lot. About 11% of your energy budget lights your living space.3


An affordable and accessible method to reduce energy costs is to change your old lighting bulbs with LEDs. LED bulbs use up to 15% lesser energy than conventional bulbs.


Take Control of Your Thermostat

The thought of returning home to a warm living space in winter is lovely. However, running the furnace for hours in pursuit of that warm dream could increase your energy bill.


The answer? A programmable thermostat.


With a programmable thermostat, it is unnecessary to operate your heater continuously to keep your home warm and comfortable. Smart thermostats will automate the setting of temperature in your home. 


You can program how warm or cool you’d like your home to feel during the day. Your heating system will switch itself off and on when required to achieve your ideal temperature.


Set your thermostat to turn in at the 45-minute mark before you rise or come to your home after work. Then, you’ll have a pleasant climate in the house, no matter what time of year it is. There would be no energy wasted.


Step 2: Assess Your Home for Energy Efficiency Opportunities

The upgrade of your furnace, air conditioning, and lighting is just half the fight. If the air you’re paying for to cool or heat can’t stay in the house, you’re back at starting from scratch.


It is necessary to complete the more significant tasks to get the most out of the appliance’s upgrades. The following are the two parts of your home that should be prioritized when limiting energy consumption.


Improve Your Insulation

Making sure your home is well-insulated from outside influences is an effective way to boost efficiency. It’s also important to know how to cool your attic. The insulation of your walls on the exterior will help you reduce the energy used for cooling and heating because the conditioned air cannot escape.


The attic, basement, or crawlspace might also cause inefficient temperature control. Even if you do not spend most of your time in those spaces, these areas can let the cold air in. Therefore, you need to consider installing insulation in these areas to help keep your energy expenses low.


Insulating and sealing these frequently overlooked areas could reduce your home’s energy consumption by as much as 11%. What is the principal reason and goal of insulation?


Evaluate Your Windows and Doors

Windows and doors that are not efficient are among the primary causes of energy inefficiency, especially in older houses. To improve your home efficiency, try the following:


  • Air leaks can be sealed by caulking, weather-stripping, air-sealing the attic, draft doors, windows, and fireplaces. You’ll keep the outside air out and the interior air inside. Make sure to check for air leaks within the ducts too.
  • Add window blinds and shades – Glass is the weakest point of the protection of your home from outside temperatures. Shades, blinds, and shutters offer extra layers of protection.
  • Replacement of your windows – If your home has single-paned windows, you may prefer to replace them with more efficient windows with glazed glass gas-filled alternatives, triple- or double-paned glass.


Conclusion – How to Improve Your Home Efficiency and Save Energy?

With the rising energy cost and the need for energy efficiency, there’s never been a better time to increase your home’s efficiency. Conserving the environment and your cash is an easy choice. One of the most intrusive and affordable ways to do this is installing attic insulation.


Our team of experts is knowledgeable about insulation’s importance and gives the highest quality customer service. We also provide the installation of insulation, insect-proofing, and attic cleaning services in the Bat Area. So contact us if you’re trying to ensure your attic stays cool or warmer. Together, we’ll be able to reduce your energy use quickly.


ESI Heating & Cooling San Jose

1900 Camden Ave, San Jose, CA 95124, United States